Two 5.25" space converted to eight 2.5" hotswap mobile rack module (additional RAID Controller Card needed)

Support 8 x 2.5" SATA2/SATA3 (SAS6G) HDD/SSD, fit 7mm, 9.5mm, 12.5mm, 14.5mm, 15mm height of HDD

Entire mechanism by heat conductive aluminum extrusion heatsink with glossy brushed finish on the surface

The newest PLinkUSA / RackBuy creative RailWay hotswap tray design with smooth travel while sliding in and out

Patented anti-vibration spring design, HDD can be mounted from two sides or bottom of hotswap HDD tray

8 HDD LED: each LED with 2 colors, blue for power, purple for access (HDD fails if keeping solid purple)

Cooling system with one 70mm x 15mm exhaust fan at rear side of HDD cage

Front interface (LED): fast red flash as overheat, slow red flash as fan malfunction

Rear interface (1): 8 x SATA 7pin data transfer port, 2 x SATA 15pin psu input port, HDD access signal on/off switch

Rear interface (2): 1 x 2.54pin temperature overheat connector and 1 x 2.54pin fan malfunction connector

Rear interface (3): 8 x 2.54pin HDD signal connector

Rear interface (4): high speed fan or low speed fan adjustable switch
Accessory Pack: key x 2pcs, M3 flat head nickel screw x 36pcs, M3 round head nickel screw x 8pcs

Product dimension: 160(L) x 146(W) x 86(H)mm

Package: N.W. 1.08 KGM, G.W. 1.24 KGM, CUFT 0.200 (255mm x 125mm x 180mm, single box packed)