PRODUCT TECHNICAL SPECIFICATIONS

• Three 5.25" space converted to twelve 2.5" hotswap mobile rack module (additional RAID Controller Card needed)

• Support 12 x 2.5" SATA2/SATA3 (SAS6G) HDD/SSD, fit 7mm, 9.5mm, 12.5mm, 14.5mm, 15mm height of HDD

•  Entire mechanism by heat conductive aluminum extrusion heatsink with glossy brushed finish on the surface

• The newest PLinkUSA / RackBuy creative RailWay hotswap tray design with smooth travel while sliding in and out

• Patented anti-vibration spring design, HDD can be mounted from two sides or bottom of hotswap HDD tray

• 12 HDD LED: each LED with 2 colors, blue for power, purple for access (HDD fails if keeping solid purple)

• Cooling system with one 80mm x 15mm exhaust fan at rear side of HDD cage

• Front interface (LED): fast red flash as overheat, slow red flash as fan malfunction

•  Rear interface (1): 12 x SATA 7pin data transfer port, 3 x SATA 15pin psu input port, HDD access signal on/off switch

• Rear interface (2): 1 x 2.54pin temperature overheat connector and 1 x 2.54pin fan malfunction connector

• Rear interface (3): 12 x 2.54pin HDD signal connector

• Rear interface (4): high speed fan or low speed fan adjustable switch

• Accessory Pack: key x 2pcs, M3 flat head nickel screw x 52pcs, M3 round head nickel screw x 8pcs

• Product dimension: 165(L) x 146(W) x 127(H)mm

• Package: N.W. 1.55 KGM, G.W. 1.72 KGM, CUFT 0.267 (255mm x 165mm x 180mm, single box packed)