PRODUCT TECHNICAL SPECIFICATIONS

• High efficiency
• Low Ripple & Noise
• Output over voltage protection
• Short circuit protection on all outputs
• Reset table power shut down
• Approved by UL, TUV, CB & CE
• INTERNAL 12 VDE fan
• Complies with FCC part 15 subpart J Class B at 115VAC operation & CISPR 22 Class B at 230 VAC operation
• 100% burn-in under high ambient temperature(50¢J)
• Vacuum-impregnated transformer
• MTBF:100K hours at 25¢J
• 100% Hi-pot tested
• FULL RANGE 100~240VAC

Input Characteristics

• Voltage: 95-132 VAC or 180-264 VAC switch able
• Frequency: 47 Hz TO 63 Hz
• Input current: 10 amps maximum/ 115 Vrms,60 Hz. 5 amps maximum /230 Vrms,50Hz.

Specification

• Remote ON/OFF Control: The power supply shall accept a logic collector level which will disable / enable all output voltage (excluding +5V standby).
• Temperature range: operating 0¢J~50¢J, storage -20¢J ~ +80¢J
• Temperature coefficient: 0.01% / ¢J
• Transient response: output voltage recovers in less than 1 ms max. following a 25% load change
• Hold-up time: 16ms minimum at full load & nominal input voltage
• Dielectric withstand: input / output 1800 VAC for 1 second, input to frame ground 1800VAC for 1 second
• Humidity: 5~95% RH
• Efficiency: 65% min. 70% typical, at full load
• Power good signal: turn-on delay 100 ms to 500 ms
• Overload protection: 150% max.
• Inrush current: 60A cold , 80A ware at 132 VAC
• Over voltage protection: +5V output : 6.5V; +3.3V output: 4.6V;+12V output: 15.5V

  AC INPUT: 115/230 Vac~ 12/6A 60/50Hz DC OUTPUT :
  COLOR	BROWN	RED	WHITE	YELLOW	BLUE	PURPLE	BLACK	GREEN	ORANGE
  DC	+3.3V	+5V	-5V	12V	-12V	+5V-SB	COM	PS-ON	PW-OK
  OUTPUT	20A	30A	0.5A	15A	1.0A	2.0A	RETURN	REMOTE	P.G.
  +3.3V and +5V max Output 200W, Peak Surge Max Output 382W